How to Restore Old Family Photos with AI
Updated 2026-11-12
Somewhere in most families is a box of photographs slowly fading, curling and cracking. AI restoration can repair scratches, tears, stains and fading in minutes, work that used to take a retoucher hours. The results depend heavily on the scan you start with, though, so this guide covers the whole process: digitising, restoring with AI Old Photo Restoration, optional colourising with Colorize Black & White Photos, and looking after the originals.
Step 1: Digitise the photo properly
A good scan matters more than any setting. The AI can only rebuild what it can see.
With a flatbed scanner
- Clean the glass first; dust shows up as scratches.
- Scan at 600 dpi or more, in colour even for black-and-white prints (it keeps the tone of sepia and faded prints).
- Save as PNG or high-quality JPEG.
With a phone
- Lay the print flat in soft daylight near a window, not under a lamp, and turn the flash off.
- Hold the phone parallel to the print so it is not distorted into a trapezium.
- Fill the frame with the photo and tap to focus on a face.
Always take prints out of glass frames and plastic sleeves before you scan them. Reflections look like damage, and the AI will try to "repair" them.
Step 2: Tell the AI what is wrong
Upload the scan to AI Old Photo Restoration and choose the damage type that best describes the worst problem:
- Scratches and tears: cracks, creases, tears and surface scratches.
- Faded and discolored: washed-out contrast, yellowing or colour shifts.
- Water damage: stains, tide marks and blotches.
- Missing corners or edges: chunks torn away or eaten by an album.
- General wear: a bit of everything.
Then choose whether to keep it black and white or add colour.
Step 3: Check faces and details
Compare the result to the original, especially faces. Where damage was light, the AI repairs it faithfully. Where a face was badly scratched or blurred, it has to rebuild missing detail, and that rebuild is a best guess. If it does not look like the person, try again or choose a different damage type. For a very damaged print, run the result through a second time.
Step 4 (optional): Colourise
You can add colour in the restoration step, but for more control restore first, then open Colorize Black & White Photos. There you can pick a palette (natural and true to the era, vivid modern, warm vintage or muted pastel), set a skin tone hint, and choose the era from the 1900s to the 1980s so clothes and settings get period-appropriate colours. Remember the colours are an educated guess: black-and-white film never recorded them.
Step 5: Look after the originals
- Keep the original scan as well as the restored version. Never overwrite it.
- Back up both in at least two places, such as a cloud folder and an external drive.
- Store the physical prints flat, in acid-free sleeves or boxes, away from sunlight, heat and damp.
- Write names, places and dates in a text file alongside the scans while someone still remembers them.
Ideas for restored photos
- Framed prints for an anniversary or a grandparent's birthday.
- Memorial boards and service sheets.
- Family tree and ancestry profiles.
- A shared family album or slideshow at a reunion.
Common questions
Is AI photo restoration free?
Yes. Every account gets a daily allowance of free runs on the free queue, with no subscription, and nothing is stamped on the result. Credits give an instant result.
Can it restore a photo that is completely torn in half?
Scan both halves together, lined up as closely as you can, then choose "Scratches and tears". The AI repairs the tear line; any part that is actually missing is reconstructed.